D
Y
4 S
YSTEMS
I
NC
.
812628 V
ERSION
1 O
CTOBER
2003
XI
Abbreviations
Table 3 lists the abbreviations used to describe the size of a memory device or a range of
addresses.
Memory
Addresses
Unless otherwise stated, all memory addresses are shown in hexadecimal notation.
Icons
The following icons are used throughout this document:
T
ABLE
3: Abbreviations
Abbreviation
Convention
1 Kbyte
1,024 bytes
1 Mbyte
1,024 Kbytes
1 Gbyte
1,024 Mbytes
Cross Reference
Warning
Caution
Note
Tip
Cross references to other documents are used when a subject being discussed is addressed
in depth by another, more authoritative document. Cross references are also used for
document chapters and sections.
The warning icon indicates procedures in the manual that, if not carried out, or if carried out
incorrectly, could cause physical injury, electrical damage to equipment, or a non-
recoverable corruption of data. Warnings include instructions for preventing such damage.
Please observe warning icons and read the accompanying text completely before carrying
out the procedure.
The caution icon indicates non-catastrophic incidents, complex practices, or procedures
which, if not observed, could result in damage to the hardware. Cautions include specific
instructions for avoiding or minimizing these incidents.
The note icon highlights exceptions and special information.
Tips provide extra information on the subject matter. This could include hints about how to
use your current DY 4 card to its maximum potential.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
