- 26 -
The following drilled sections are drilled to match the next size, so make sure you have the correct
ends matched up (holes aligned).
Assemble the 2.75" OD element to the 3" OD base element using the two stainless steel 1/4-20 x 3-
1/2" long bolts, four 1/4” stainless steel flat washers and two 1/4-18 stainless steel Nyloc nuts
(example shown in
Figure A-4
). When tightening the bolts and Nyloc Nuts, tighten them enough
to hold, but not tight enough to deform the aluminum elements.
Assemble the 2.5" OD element to the 2.75" OD element using the 1/4-20 x 3-1/4" long bolts, four
1/4” stainless steel flat washers and two 1/4-18 stainless steel Nyloc nuts (example shown in
Figure A-4
). When tightening the bolts and Nyloc Nuts, tighten them enough to hold, but not tight
enough to deform the aluminum elements.
Assemble the 2.25" OD element to the 2.5" OD element using the 1/4-20 x 3" long bolts, four 1/4”
stainless steel flat washers and two 1/4-18 stainless steel Nyloc nuts (example shown in
Figure A-
4
). When tightening the bolts and Nyloc Nuts, tighten them enough to hold, but not tight enough to
deform the aluminum elements.
Assemble the 2" OD element to the 2.25" OD element using the 1/4-20 x 2-3/4" long bolts, four
1/4” stainless steel flat washers and two 1/4-18 stainless steel Nyloc nuts (example shown in
Figure A-4
). When tightening the bolts and Nyloc Nuts, tighten them enough to hold, but not tight
enough to deform the aluminum elements.
Figure A-4
Содержание DXE-7580FS-VA
Страница 10: ...9 Figure 3 Overall Super Duty Pivot Base US Patent No 8 130 168 Assembly Reference Drawing...
Страница 24: ...23...
