DX Engineering DXE-7580FS-VA, Руководство пользователя

Страница: 37 / 40

- 36 -
Additional Material Required, but not Supplied:
Antenna Mounting Pipe - 3" Schedule 80 Galvanized steel mounting pipe, x 7 feet long
minimum (see text for detailed information).
Concrete - For mounting pipe installation (see text for detailed suggestions).
Suggested Parts Not Included
DXE-VRW-1 - Manual Winch Add-on Raising Kit
Manual winch add-on kit for the High Performance DX Engineering vertical
antennas. The tilt fixtures for these antennas are equipped to accept the winch
directly. Allows easy raising and lowering of tall antennas - may be easily moved
from one antenna to another in multi-antenna arrays.
DXE-RADP-3 - Radial Plate ( patented ):
Made from Laser Cut Stainless Steel with 20 Sets of Stainless Steel Radial Attachment
Hardware. The DX Engineering Radial Plate is meant for those of you having a vertical
antenna and want an easy, neat and effective way to connect those essential radial wires
to your antenna system for the highest efficiency and strongest signals.
DXE-SSVC-3P - Stainless Steel V-Clamp for 2 to 3 inch steel pipe
This V-Clamp is made in one size that fits Steel tubing or pipe from 2 to 3'' OD as used in
antenna construction. The supplied V-bolt is long enough to attach tubing to thick plates and
is made with anti-corrosive properties. The special Stainless Steel saddle has serrated teeth
will clamp to the pipe securely by biting into the surface. For this reason, it is not
recommended for softer aluminum tubing or pipe. U-Bolt thread dimensions: 3/8"-16 x
1.75". V-bolt and saddle made from high-strength 18-8* stainless steel
DXE-RADP-1HWK - Radial Plate Wire Attachment Hardware Kit - Stainless Steel
Additional 20 Sets of ALL Stainless Steel Radial Hardware for use with the DX
Engineering Stainless Steel Radial Plate.
(20) 1/4'' Bolts - (20) 1/4'' Nuts - (20) 1/4'' Flat Washers
(20) 1/4'' Split Washers - (20) 1/4'' Star Washers