DX Engineering DXE-7580FS-VA, Руководство пользователя

Страница: 39 / 40

- 38 -
DXE-225RT-20 - Ring terminal 16-14 Wire Gauge, 1/4" hole/20 Pack
\his is a set of 20 ring terminals for AWG #14 to 16 wire with a clearance hole for a 1/4" bolt. These are the same crimp
terminals supplied with the DXE Radial Wire Kits for #14 Radial and Antenna Wire.
DXE-RADW-65RT Pre-Assembled, 65 foot Radial Wires, w/ 1/4" ring Terminals, 20 Pack
The DXE-RADW-65T Radial Wire Kit include the highest quality 14 gauge stranded copper wire with a relaxed black PVC
insulation for easy installation of your radial system. This allows fast and easy installation of your radial ground system. The
stranded wire and relaxed insulation mean that the wire will lay flat as you place it on the ground - easy to install! The twenty 65 foot
pre-cut radial wires include 1/4" ring terminals professionally crimped on one end for quick and easy attachment to the radial
plate. This Radial Wire Kit is designed for users of vertical antenna systems which have the need for a high quality radial system for
optimum antenna performance. The 1/4" ring terminals are machine crimped for maximum grip. Soldering is not required for
strength, but is recommended if installed in corrosive environments such as salt spray.

Packed 20 Radial Wires per package

14 gage, stranded copper wire

Black relaxed PVC insulation

1/4" Ring Terminal professionally crimped on each Radial Wire
DXE-STPL - Radial Wire Anchor Pins, 100/pack - No need to bury your radials!
DX Engineering Radial Wire Anchor Pins are perfect for fastening radials below the grass line to eliminate the risk of damaging your
radials during lawn maintenance.

100 count - 6'' Pins

11-Gauge
DXE-STPL-100P Radial Wire Anchor Pins, 100/pack
DXE-STPL-300P Radial Wire Anchor Pins, 300/pack
DXE-STPL-100BD - Radial Wire Staple, Biodegradable, 3", 100 pack
DX Engineering DXE-STPL-100BD is a 100-pack of 3” biodegradable anchors that are produced from recycled PLA
(Polylactide Resin). Depending on the weather conditions, they will degrade in about a year. They are easily installed
and will hold radial wires in place until lawn roots overtake them - and then disappear. Ecologically friendly!
SUM-900031 - Automatic Wire Stripper/Crimper/Cutter, 24-10 Ga.
Our DX Engineering wire stripper uses a spring-loaded design to make quick work of wires ranging from 24 to 10 gauge. Just insert
the wire, squeeze the handle, and listen for the click. That’s the sound of another perfect wire stripping job performed in about 2
seconds- a fraction of the time it takes your pocket knife to do the same job. An adjustable wire length guide helps
you make uniform strips, and a built-in wire cutter and crimper helps you complete your wiring job.

Spring-loaded design

Strips wires ranging from 24 to 10 gauge

built-in wire cutter and crimper
DXE-3M2155 - 3M Temflex™ 2155 Rubber Splicing Tape
.
Conformable self-fusing rubber electrical insulating tape. It is designed for low voltage electrical insulating and
moisture sealing applications. For outdoor use, it should be protected from UV deterioration with an overwrap of
TRM-06133
TRM-06133 - Scotch® Super 33+
.
Highly conformable super stretchy tape for all weather applications. This tape provides flexibility and easy handling for
all around performance. It also combines PVC backing with excellent electrical insulating properties to provide primary
electrical insulation for splices up to 600V and protective jacketing.