DX Engineering DXE-7580FS-VA, Руководство пользователя

Страница: 20 / 40

- 19 -
There are three holes with slots in the mounting bracket. The flat washers will fit through the
large holes. Once in place, push the winch inward (toward the antenna elements) allowing the
three bolts to go into the three slots. Tighten the hardware to hold the winch in place.
Connect the Hook from the manual winch strap to the Antenna Hook Mount as shown below.
To remove the winch, simply reverse this sequence.
The winch should be removed and stored when not in use. Do not leave the winch outdoors
since extended weathering and sunlight may damage or weaken the strap. Refer to the manual
that is included with the
DXE-VRW-1 Manual Winch for details.