Small YAGI Antenna
User’s Guide
Step 1: Unpack
Remove the antenna and the hardware bag from package. Make sure the following parts
are in the package:
• Antenna rear section
• Antenna front section
• VHF element
• Mounting pipe and foot
• Hardware bag
U-Bolt
(2) 10/32” Hex nuts
(2) Black plastic end-caps
(5) 1/4” Hex nuts
Matching transformer
(2) 5/8” Bolts
(4) 7/16” Washers
2 1/2” Screw
Unfold the elements on the rear section of
the antenna until they lock into place as
pictured here. Make sure the elements are
flat and parallel to each other when you’re
finished.
BEFORE YOU START!!!
Please read the IMPORTANT SAFETY INFORMATION sheet included in this
package.
Step 2: Unfold the antenna’s rear section
Step 3: Unfold the antenna’s front section
Unfold the UHF elements on the front
section until they lock into place as pictured
here. Make sure the elements are flat and
parallel to each other when you’re finished.
