8
2.2 Mount
ing the Camera
The dome camera is for use in surface or pendent mounting applications, and the mounting surface must
be capable of supporting loads of up to 10 lb (4.5 kg). (Wall mount and ceiling mount are sold separately.)
The dome camera’s mounting bracket should be attached to a structural object, such as hard wood, wall
stud or ceiling rafter that supports the weight of the dome camera.
CAUTION: A silicone rubber sealant must be applied to seal the housing to secure waterproofing.
2.2.1 Locking the Camera
1. Using the supplied mounting Template Sheet, mark and screw holes on the mounting surface
(Figure A).
2. Fix the Mounting Bracket to the mounting surface using the supplied anchors (4x) and mounting
screws (4x) (Figure B).
3. Hook up the Safety Lanyard to the Safety Lanyard Hook of the Mounting Bracket (Figure C).
4. Align the locking tab on the bracket and the locking slot on the base of the dome (Figure D).
5. Turn the dome counterclockwise about 10 degrees to lock it in position (Figure E).
