16
5. Select “
MODE
” and “
SPEED
”.
6. Select “
START ANGLE
”. Press the
IRIS Open
key
to go to the “CONTROL” settings. Move the desired
position and the zoom position. Press the
IRIS Close
key then the “CONTROL” disappears. To adjust at
the 0.1 degree interval, press the
Tele
or
Wide
key at the pan field and the tilt field.
7. Select “
END ANGLE
”. Press the
IRIS Open
key to go to the “CONTROL” settings. Move the desired
position and the zoom position. Press the
IRIS Close
key then the “CONTROL” disappears. To adjust at
the 0.1 degree interval, press the
Tele
or
Wide
key at the pan field and the tilt field.
8. Set “
SCAN DIR
” to CCW or CW.
9. Select “
SWAP
”, Set to ON to exchange the start angle and the end angle.
10. Set “
DWELL time
”.
11. Set “
FOCUS
”.
12. Select “
SAVE AND EXIT
” and press the
Right
key.
NOTE: 09: AUTO-PAN mode (endless panning)
