11
NOTE:
Open the DIP switch cover and change the setting of the DIP switch as needed.
The cover should be closed after setting DIP switch.
2.4 Setting Dome Camera Address (ID)
To prevent damage, each dome camera must have a unique address (ID).
The factory default ID is 1.
Refer to ‘3.11 Dome Communication’ section for detailed information.
2.5 Setting Dome Camera Video Signal & Coaxitron Protocol
S1
You can set the video signal with D1 in S1.
S1-D1
Video Signal
OFF
HD-TVI OUTPUT
ON
HD-ANALOG OUTPUT
You can set coaxitron protocol with D2 and D3 in S1.
S1-D2
S1-D3
HD-TVI OUTPUT
AHD OUTPUT
OFF
OFF
TVI-C
A_CP-PTZ
ON
OFF
Pelco-C
Reserved
OFF
ON
Reserved
Reserved
ON
ON
Reserved
Reserved