15
3.3 Auto Scan
The Auto Scan supports up to 17 programmed angles at different speeds. To setup an Auto Scan:
AUTO SCAN SETUP
NUMBER : 01
TITLE : A01
MODE : NORMAL
SPEED : 5 STEP
START ANGLE : ----- -----
END ANGLE : ----- -----
SCAN DIR : CCW
SWAP : OFF
DWELL : 03 SEC
FOCUS : AUTO
SAVE AND EXIT(ESC TO CANCEL)
NUMBER
01 ~ 08, 10 ~ 17,
09
: AUTO-PAN mode.
TITLE
up to 6 characters
MODE
NORMAL, VECTOR, RANDOM (AUTO-PAN mode: NORMAL, RANDOM only).
NORMAL
Move from start point to end point in panning only
VECTOR
Move from start point to end point with tilt and zoom simultaneously and linearly.
RANDOM
Move randomly between the start point and the end point
SPEED
1 ~ 13, the lower number the slower the camera will move.
SCAN DIR
Set the Scan direction, CCW (Counter Clock Wise), CW (Clock Wise).
SWAP
Swaps the start point for the end point.
DWELL
Set the dwell time at both start and end points, 01 ~ 99 seconds.
FOCUS
AUTO, MANUAL
1. Press
MENU
to display the main menu on the monitor. Scroll to Auto Scan and press the
Right
key.
2. Select “
NUMBER
” and set the desired number by pressing the
Left
or
Right
key.
3. Select “
TITLE
” and press the
Tele
or
Wide
key to enter the title edit mode.
4. Press
Tele
or
Wide
to change the alphanumeric characters. Move to the next position by pressing the
Left
or
Right
key or move down to the character table and press the
IRIS
Open
key at the desired
character. The cursor position will move to the next position automatically. Press the
Left
or
Right
key
at the “ALL DELETE” to delete all characters. Press
Left
or
Right
at the “EXIT” field to finish title edit menu.
TITLE EDIT MENU
(CTRL KEY)
A01
*
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( )
ALL DELETE
EXIT(ESC TO EXIT)
