9
CAUTION: Before installing the mounting bracket to the surface, pre-adjust the four mounting
screws "A" on the base of the camera to best match the mounting bracket locked
position. Unscrew the locking screw on the side of the dome's base and fit the tab of the
mounting bracket into the locking slot. Screws "A" should not be too tight or too loose
when the dome is in locked position. After setting the proper positions of screws "A",
remove the mounting bracket and install it to the mounting surface. If it is too difficult
to lock the dome in position after the mounting bracket has been installed, readjust the
screws "A" by slightly unscrewing them and try to install dome camera again.
