37
/
66
SM-1 Ev6/25062014
Mounting:
-
Place the belts in space between the guide bars and bolts of the lift stop
-
Pull the beam and cross on the guide bars and place the teeth segment in the teeth of the guide bar (1
st
tooth
in the 1
st
groove)
-
Mount springs of the lift stop, pull rods of the lift, choke pull rod, horn, control unit, plug of the electric
motor and STOP button
-
Mount the belts on the pulleys, follow the order 1, 2, 3, 4 (Picture 80)
-
Push the console on the shaft by hands
-
Tighten the screws, follow the order 3, 2 a 1 (Picture 74)
-
Secure the screw 2 with glue (LOCTITE 243)
-
Check the clearance between transmission and the arm, approximately 4mm (Picture 73)
-
Check the clearances of the pull bar lifts (all of them must pull equally)
-
Lubricate the pinion and cross bushing
-
Tighten the by-pass valve of the pump
