18
/
66
SM-1 Ev6/25062014
6.2 Exchange of the engine oil filter
-
Clean thoroughly the area around oil filter and filling neck
-
Suck out the oil from the crankcase through the filling neck (or discharge the oil with a discharge screw
when the mower is tilted) ATTENTION! The oil must not get under the engine in the clutch space – the
belts might slip.
Picture 21
Picture 22
-
Dismount and exchange oil filter (put some oil on the filter sealing during assembly)
- Fill up engine oil, approximately 1,5 l (1,7 l – when exchanging oil filter)
Picture 23
Picture 24
-
Check the oil level with the dipstick (up to the upper dipstick line to increase the slope accessibility)
-
Recommended engine oil:
SAE 10W40
The producer recommends the following oil brands:
-
Per API classification: SF, SG, SH, SJ
-
Per viscosity, see table 1
-
Oil consumption increases in case of multistage king of oil (5W-20, 10W-30,
10W-40
). In such a case,
check the oil level more frequently.
Oil filter loosen jig
Suction pump
Filling neck
max
min
Oil filter
