28
/
66
SM-1 Ev6/25062014
-
Install back bracket of the blade with adjusters and the belt and belts
-
Turn the clutch to the left to tension all the belts. Then tighten securing bolt of the clutch with help of allen
key
-
Install the spring of tensioning pulleys – see
6.6 Exchange of the blade driving belt
-
Put the machine to the working position on the ground
-
Test the clutch operation (DON’T START THE ENGINE) – when activated, both sides of the clutch brake
disc must move by 0,5 to 1 mm closer - further on, see
6.9 Exchange of the clutch
-
Start the motor and test the activation of mowing mechanism (DON’T MOUNT THE BLADE)
Activated clutch must not activate the brake
Deactivated clutch has to stop the mechanism within 0,5s (within 5 seconds with the
mounted blade)
When the clutch is activated, the brake disc must not warm up
Both sides of the brake must be adjusted equally
-
Check tightness of the nuts and the belt slack.
-
Mount the clutch cover and seal it with silicone. Secure the screws with glue (LOCTITE 243)
-
Mount the blade with using LOCTITE 243
