Dutypoint VT Booster Set, Руководство по эксплуатации и обслуживанию

Страница: 99 / 123

English (GB)
41
16. Factory settings
1)
Only available if you have fitted an advanced functional module (FM300).
17. Disposal
This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest Grundfos company
or service workshop.
The waste battery should be disposed of through the national
collective schemes. If in doubt, contact your local Grundfos
company.
Subject to alterations.
● Function is enabled.
❍
Function is disabled.
- Function is not available.
Settings
CRE, CRIE, CRNE, SPKE, MTRE
Function
description
With factory mounted
sensor
Without factory
mounted sensor
CME
Setpoint 67 % of sensor range 67 % of sensor range 67 % of sensor range Page 12
Operating mode Normal Normal Normal Page 12
Control mode Constant pressure Constant pressure Constant pressure Page 12
Pipe filling function Not active Not active Not active Page 26
Buttons on product Active Active Active Page 29
Stop function (Low-flow stop function) Not active Not active Not active Page 25
Controller (Controller settings) ● ● ● Page 20
Ti 0.5 0.5 0.5
Kp 0.5 0.5 0.5
Operating range 13-100 % 13-100 % 13-100 % Page 21
Ramps Page 27
Ramp-up 1 second 1 second 1 second
Ramp-down 3 second 3 second 3 second
Number (Pump number) - - - Page 28
Radio communication Active Active Active Page 28
Analog input 1 4-20 mA Not active Not active
Page 16 Analog input 2 Not active Not active Not active
Analog input 3 Not active Not active Not active
Pt100/1000 input 1 Not active Not active Not active
Page 17
Pt100/1000 input 2 Not active Not active Not active
Digital input 1 External stop External stop External stop
Page 17
Digital input 2 Not active Not active Not active
Digital in/output 3 Not active Not active Not active
Page 18
Digital in/output 4 Not active Not active Not active
Pulse flowmeter
❍ ❍ ❍
Page 27
Predefined setpoints 0 bar 0 % 0 % Page 23
Analog output Not active Not active Not active Page 19
External setpoint function Not active Not active Not active Page 21
Signal relay 1 Not active Not active Not active
Page 18
Signal relay 2 Not active Not active Not active
Limit 1 exceeded Not active Not active Not active
Page 24
Limit 2 exceeded Not active Not active Not active
Standstill heating Not active Not active Not active Page 27
Motor bearing monitoring Active Active Active Page 27
Pump name - - - Page 29
Connection code - - - Page 30
Unit configuration SI SI SI Page 28