Dutypoint VT Booster Set, Руководство по эксплуатации и обслуживанию, Страница: 95 / 123

English (GB)
37
12. Installation of communication interface
module (CIM)
Fig. 44 Antistatic service kit
1. Disconnect the power supply to the pump.
2. Remove the terminal box cover by loosening the four screws
(fig. 45 , pos. A) and lifting the terminal box cover (fig. 45 , pos.
B).
Fig. 45 Removing terminal box cover
3. Remove the CIM cover (fig. 46 , pos. A) by pressing the
locking tab (fig. 46 , pos. B) and lifting the end of the cover (fig.
46 , pos. C). Then lift the cover off the hooks (fig. 46 , pos. D).
Fig. 46 Removing CIM cover
4. Remove the securing screw (fig. 47 , pos. A).
Fig. 47 Removing securing screw
5. Fit the CIM module by aligning it with the three plastic holders
(fig. 48 , pos. A) and the connecting plug (fig. 48 , pos. B).
Press home the module using your fingers.
Fig. 48 Align CIM module with plastic holders (pos. A) and
connecting plug (pos. B)
6. Fit and tighten securing screw (fig. 47 , pos. A) to a torque of
1.3 Nm.
7. Make the electrical connections to the CIM module as
described in the instructions delivered with the module.
8. Connect the cable screens of the bus cables to earth via one
of the earth clamps (fig. 49 , pos. A).
Fig. 49 Connecting cable screens to earth
Caution
Always use an antistatic service kit when
handling electronic components. This will
prevent static electricity from damaging
components.
When unprotected, place the component on the
antistatic cloth.
TM
06
44
62
23
15
T
M
06
40
81
15
15
TM
06
40
84
15
15
A
B
B
C
D
A
T
M
06
40
8
2 15
1
5
TM
06
40
83
15
15
T
M
06
41
95
16
15
A
A
B
A