We have engineered the Nitro Evader BX to take the rough
and tumble abuse that makes R/C buggies fun. We are so
confident of the quality and durability of the Stress-Tech
plastic parts that we will replace any Stress-Tech plastic part
you break during the first 12 months you own the buggy.
Just send in the part to us and we will send you a FREE
replacement. Please see the Nitro Evader BX parts list for
the items covered under the Stress-Tech guarantee.
To receive your free replacement part please send the
following to the Hobby Services address listed on the cover
of this manual.
❏
1. The broken part must be included.
❏
2. The part number and description of the broken part.
❏
3. Dated copy of your invoice or purchase receipt.
❏
4. Your name, phone number and shipping address.
Repair service is available anytime.
•
After the 90 day warranty (2 years for the Duratrax .18
engine), you can still have your Nitro Evader BX repaired
for a small charge by the experts at DuraTrax's authorized
repair facility, Hobby Services, at the address listed on the
front page of this manual.
To speed up the repair process, please follow the
instructions listed below.
❏
1. Under most circumstances return the ENTIRE system:
buggy and radio. The exception would be sending in a
Stress-Tech part. See the instructions under Stress-
Tech Guarantee.
❏
2. Make sure the transmitter is turned off and all of the
batteries are removed.
❏
3. Send written instructions which include: a list of all
items returned, a THOROUGH explanation of the
problem, the service needed and your phone number
during the day. If you expect the repair to be covered
under warranty, be sure to include a proof of date of
purchase (your store receipt or purchase invoice).
❏
4. Also be sure to include your full return address.
All pictures, descriptions and specifications found in this
instruction manual are subject to change without notice.
DuraTrax maintains no responsibility for inadvertent errors
in this manual.
To operate the Nitro Evader BX the following items
are required:
❏
Fuel (DuraTrax Red Alert
™
- DTXP0520)
❏
Extra Glow Plugs (DTXG3001)
❏
Glow Plug Wrench (DTXR1170)
For the pre-built version of the Nitro Evader BX, you will
also need:
❏
2 channel radio with two (2) standard servos (FUTJ20**)
❏
Twelve (12) “AA” batteries - Four (4) for the receiver and
eight (8) for the transmitter
❏
Thread-Locking Compound (GPMR6060)
❏
Receiver Battery Box (DTXM3000
❏
#2 Phillips head screwdriver (DTXR0124, Not Included)
❏
Needle nose pliers (DTXR0300, Not Included)
❏
3/32", 1.5mm & 2.5mm hex Wrenches
❏
Turnbuckle wrench
❏
Nut driver (4-way)
TOOLS INCLUDED FOR MAINTENANCE
& CLEANING
TOOLS NEEDED FOR COMPLETION
REQUIRED ITEMS FOR COMPLETION
SPECIFICATION & DESCRIPTION CHANGES
REPAIR SERVICE
STRESS-TECH
™
PARTS GUARANTEE
3
