❏
12. Assemble the rollbar as shown using ten 2.6 x 6mm
self-tapping screws.
❏
13. Drill six 1/4" (6mm) holes in the body using the
molded-in dimples as guides. Install the rollbar onto body as
shown using six 2.6 x 6mm self-tapping screws and the
included collars.
❏
14. Drill two 1/4" (6mm) holes in front of body using the
molded-in dimples as guides. Install the front brush guard
as shown with two 2.6 x 6mm self-tapping screws and the
collars included.
❏
15. Drill one 1/8" (3mm) hole in each side of the body
using the molded-in dimple as a guide, and one 5/64"
(2mm) hole 7/16" (11mm) below and 7/16" back from first
hole (use the pegs on the mirror as a guide). Install the
mirrors as shown with the collars provided.
❏
16. Remove the body clips from the parts bag. Place the body
on the body mounts. On each body mount place a body clip.
Congratulations,
you have completed preparations!
Before running your new truck, please take the time to
carefully read the instructions and watch the video before
running and breaking-in the engine. Make sure you follow
the safety precautions and most of all
...
HAVE FUN!
6
