❏
4. Re-install the fuel tank.
❏
5.
Remove the air filter and tie strap from the parts
bag. Thoroughly soak the air filter foam with some oil
(not included) and then squeeze out the excess oil. A
light machine oil (like 3-IN-ONE) will work well. Special
oils made for air filters are also available in most
hobby and motorcycle shops. Place the air filter onto
the carburetor and secure it in place with the tie strap.
Cut off the excess part of the strap
.
❏
1. Bundle all of the wires around the receiver together
with a tie-strap or a twist-tie (not included in the kit).
❏
2. Remove the clear covering from the outside of the body.
Apply decals to the body if desired. For decal placement,
see the photos on the box top.
❏
3. Assemble the rollbar as shown using ten 2.6 x 6mm
self-tapping screws.
❏
4. Drill six 1/4" (6mm) holes in the body using the
molded-in dimples as guides. Install the rollbar onto body as
shown using six 2.6 x 6mm self-tapping screws and the
included collars.
FINISHING
13
