manualshive.com logo in svg

DuraTech Industries Haybuster 572, Инструкция по эксплуатации и справочник по запасным частям, Страница: 69 / 160

Поделиться
Скачать
DuraTech Industries Haybuster 572 Скачать руководство пользователя страница 69

59

5 7 2   R O U N D   B A L E R  

 

O P E R A T I N G   I N S T R U C T I O N S

Appendix A:  WARRANTY

DuraTech Industries International Inc., warrants to the original purchaser for one year from purchase date that this 

product will be free from defects in material workmanship when used as intended and under normal maintenance and 

operating conditions.  This warranty is limited to the replacement of any defective part or parts if DuraTech Industries 

is notified within thirty (30) days of failure.

This warranty shall become void if in DuraTech Industries International, Inc’s., judgment the machine has been subject 

to misuse, negligence, alterations, damaged by accident or lack of required maintenance, or if the product has been 

used for a purpose for which it was not designed.

All claims for warranty must be made through the dealer which originally sold the product and all warranty 

adjustments must be made through same.

This warranty does not apply to tires or bearings or any other trade accessories not manufactured by DuraTech 

Industries International Inc.’s.  Buyer must rely solely on the existing warranty, if any, of these respective 

manufactures.

DuraTech Industries International Inc. shall 

not

 be held liable for damages of any kind, direct, contingent, or 

consequential to property under this warranty.  DuraTech Industries International Inc., cannot be held liable for any 

damages resulting from causes beyond its control.  DuraTech Industries International Inc. shall 

not 

be held liable under 

this warranty for loss of crops, or rental costs or any expense or loss for labor or supplies.

DuraTech Industries International Inc., reserves the right to make changes in material and/or design of this product at 

any time without notice.

All other warranties made with respect to this product, either expressed or implied, are hereby disclaimed by DuraTech 

Industries International

Содержание Haybuster 572

































































































































































Отзывы:

Нет отзывов