manualshive.com logo in svg

DuraTech Industries Haybuster 572, Инструкция по эксплуатации и справочник по запасным частям, Страница: 45 / 160

Поделиться
Скачать
DuraTech Industries Haybuster 572 Скачать руководство пользователя страница 45

35

5 7 2   R O U N D   B A L E R  

 

O P E R A T I N G   I N S T R U C T I O N S

5.3 Other Diagnosis

1. Slip Clutch Warning

 

• 

“Slip Clutch” will be displayed on the monitor screen if the PTO is engaged but the pickup isn’t    

 rotating. 

 

• 

If the pickup is rotating with the PTO engaged, shut the machine down and remove the access    

 

cover to the proximity switch for the pickup located on the right side of the machine. Check that    

 

the switch is adjusted correctly and hooked up. Reassemble and check for “Slip Clutch” warning. 

 

• 

If the pickup is not rotating with the PTO engaged, check to ensure that the pickup drive chain    

 

was installed and the slip clutch is functioning correctly. 

2. Tail Gate Indicator Open

 

• 

Monitor is showing the tail gate is open when it is actually closed. 

 

• 

Ensure that the tail gate is closed completely and the latches are fully latched. 

 

• 

Adjust clearance of proximity switches on the latches and check that they are hooked up and  

 

 working. 

3.  Improper RPM displayed on the monitor

 

• 

Monitor is displaying an inaccurate RPM with the PTO engaged

 

• 

Check proximity switch mounted on the driveline in front of the gearbox. Adjust clearance if  

 

 necessary.

Содержание Haybuster 572

































































































































































Отзывы:

Нет отзывов