manualshive.com logo in svg

DuraTech Industries Haybuster 572, Инструкция по эксплуатации и справочник по запасным частям, Страница: 16 / 160

Поделиться
Скачать
DuraTech Industries Haybuster 572 Скачать руководство пользователя страница 16

6

5 7 2   R O U N D   B A L E R  

 

O P E R A T I N G   I N S T R U C T I O N S

1.2  Operator - personal equipment

THE OPERATOR

Physical Condition

You must be in good physical condition and mental health and not under the influence of any substance (drugs, alcohol) 

which might impair vision, dexterity or judgment.

Do not operate a 

572 Round Baler

 when you are fatigued. Be alert - If you get tired while operating your 

572 Round 

Baler, 

take a  break.  Fatigue may result in loss of control.  Working with any farm equipment can be strenuous.   If you 

have any condition that might be aggravated by strenuous work, check with your doctor before operating

Proper Clothing

Clothing must be sturdy and snug‑fitting, but allow complete freedom  

of movement. Avoid loosefitting jackets, scarfs, neckties, jewelry, flared 

or cuffed pants, unconfined long hair or anything that could become 

entangled with the machine.

Protect your hands with gloves when handling hammers, screens, etc.. . 

Heavy-duty, nonslip gloves improve your grip and protect your hands.

Good footing is most important. Wear sturdy boots with nonslip soles. 

Steel-toed safety boots are recommended.

To reduce the risk of injury to your eyes never operate a 

572 Round 

Baler

.unless wearing goggles or properly fitted safety glasses with 

adequate top and side protection.

Tractor noise may damage your hearing. Always wear sound barriers (ear 

plugs or ear mufflers) to protect your hearing. Continual and regular users 

should have their hearing checked regularly.

Содержание Haybuster 572

































































































































































Отзывы:

Нет отзывов