manualshive.com logo in svg

DuraTech Industries Haybuster 572, Инструкция по эксплуатации и справочник по запасным частям, Страница: 48 / 160

Поделиться
Скачать
DuraTech Industries Haybuster 572 Скачать руководство пользователя страница 48

38

5 7 2   R O U N D   B A L E R  

 

O P E R A T I N G   I N S T R U C T I O N S

5.4.8  Twine Dispensing Indicators

Twine indicators are illuminated when the twine is being fed in to the baler.  They will blink with an audible alarm 

when they are not spinning during a tie sequence.  For example, twine ball goes empty during tying sequence, this will 

notify the operator.

5.4.9  Twine Arms Position Indicator

The twine arms position indicator is displayed on the Plus 1 controller across the top of the display.  As the screen 

indicator moves from left to right, this corresponds to the twine arm moving from center to right across the baler as 

viewed from the rear of the machine.

5.4.10  Auto Dump Feature

The auto dump feature allows the operator to dump the bale automatically after a wrapping sequence is complete.  The 

feature can be turned on and off using the miscellaneous setup screen. 

5.4.11  Faults Screen

This screen displays all system faults for the inputs and 

outputs.  An active fault is identified by a square box to the 

left of the fault name.  A fault is typically caused by poor 

wire connections, faulty sensors or output coils.  Faults are 

indicated on the bale monitor screen by an exclamation 

point by button 6.

5.4.12  Bale History

This screen displays bale counts for the current field, 

current season, machine total bales, field hours and 

machine total hours. The operator is able to edit or reset the 

bales for the season and field but not the total bales. The 

operator is also able to edit the field hours but not the total 

hours.  

Содержание Haybuster 572

































































































































































Отзывы:

Нет отзывов