manualshive.com logo in svg

DuraTech Industries Haybuster 572, Инструкция по эксплуатации и справочник по запасным частям, Страница: 20 / 160

Поделиться
Скачать
DuraTech Industries Haybuster 572 Скачать руководство пользователя страница 20

10

5 7 2   R O U N D   B A L E R  

 

O P E R A T I N G   I N S T R U C T I O N S

1.4 Shielding

This 572 Round Baler is equipped with shielding at all major points of potential injury. All Shields should be kept in 

place during operation.  Bodily injury may occur if the unit is operated without shields.

WARNING:

 Shields are installed for your protection and to keep material off machine parts.  Do not 

operate this baler without shields in place.

6500057

CAUTION:  

ADJUST TRACTOR DRAWBAR SO THAT 

THE DISTANCE FROM THE END OF THE P.T.O. 

SHAFT ON THE TRACTOR TO THE CENTER OF THE 

DRAWBAR HITCH PIN IS 16”.

WARNING:  

NEVER PLACE BALES WHERE THEY 

COULD ROLL DOWNHILL.

BALES ARE HEAVY, LARGE AND ROUND.

FAILURE TO COMPLY WILL RESULT IN DEATH OR 

INJURY.

6500470

Содержание Haybuster 572

































































































































































Отзывы:

Нет отзывов