Duplo DC-6 Mini, Инструкция по эксплуатации, Страница: 76 / 100

60
Message Status and Solution
Status : There is no document on the feed tray.
Solution : Load document on the feed tray.
(
→ P.10 Loading Documents)
Status : The top cover is open.
Solution : Close the top cover.
Status : The front cover is open.
Solution : Close the front cover.
Status : The perforation unit or the cover is not installed.
Solution : Install the perforation unit or the cover.
Status : Double feed
Solution : Remove the document from the inside of the machine and
then press the STOP key.
Status : Too many documents are loaded on the feed tray.
Solution : The height of the document stack should not exceed the
MAX level. (There is an indication on the right side of the
feed tray.) Remove the documents and then press the STOP
key.
Status : There is paper jam in the document infeed area or feeding
area.
Solution : Remove the document from the infeed area or feeding area
and then press the STOP key.
( → P.65 Example: J3 Feed error)
Status : There is paper jam in the slitter area.
Solution : Remove the document from the slitter area and then press
the STOP key.
When input value of each slitter is 55-60, the gutter de fl ector may
not be available.
When Messages Appear
When an error occurs, messages and fi gure appear on the LCD panel. In such cases, follow the
procedures below to solve the cause.
IMPORTANT
Place document
on feed tray
to Clear
Feed tray
overload
to Clear
Remove document
from feed area
to Clear
No document
J2 Feed tray
Cover open
Close cover
J3 Feed error
TOP/FRONT/EXIT
J4 Slitter
Remove document
from slitter area
to Clear
Remove document
in the machine
to Clear
Double feed