Duplo DC-6 Mini, Инструкция по эксплуатации

Страница: 49 / 100

Programming JOB on Control Panel
33
2
Programming a JOB on the Control Panel
The following items should be entered to program a JOB.
JOB No.
Select a JOB number in which the JOB currently being programmed is saved.
JOB name
Enter a JOB name using the NUMERIC keys for easy reference.
Width
Enter the width of document.
Length
Enter the length of document.
REG mark position (Optional on 115V model and 230V Asia model)
When using REG mark reading:
Enter the distance between the lead edge of the document and the REG mark, and the
distance between the right edge of the document and the REG mark.
Slit position
Enter the distances between the right edge of the document and each slit position.
The DC-616 can slit up to 6 positions on one document.
Cut position
Enter the distances between the lead edge of the document and each cut position.
The DC-616 can cut up to 25 positions on one document.
Crease position (Perpendicular to the document feed direction)
Enter the distance between the lead edge of the document and each crease position.
The DC-616 can crease up to 20 positions on one document.
Slitter guide
When any slitters are not in use, these slitters act as document guide to stabilize the document
conveyance. Recommended for light weight document.
Crease depth
This sets the depth of the crease when creasing a document.
Usually set to
MID .
Set to MAX for heavy weight document and MIN for light weight document.
Auto cut
Lead margin and trail margin are fi nely cut and dropped in the waste box.
When documents do not have lead margin or trail margin, this must be turned off.
Perforating position (Optional on 115V model and 230V Asia model)
Enter the distance between the right edge of the document and each perforating position.