Duplo DC-6 Mini Скачать руководство пользователя

Страница: 7 / 100

Notes on Safety (Please Read and Observe)

●

Caution for Grounding

●

Use only the power cord that is provided among the accessories.

Insert the power cord plug

rmly into the socket, so that proper electrical contact

is effected.

→

Use of any other power cord could result in imperfect grounding.

If grounding is imperfect and electrical leakage occurs,

re or electric shock

could result.

WARNING

●

Caution for Power Supply and Power Cord

●

Use only the power cord that is provided among the accessories. The power cord

is only for this product. Never use it for another product.

●

Do not use a source voltage other than that speci

ed.

Do not connect two or more loads to a single outlet.

→

Doing so may result in

re or electric shock.

●

Do not remove or insert the power plug with wet hands.

→

Doing so may result in electric shock.

●

Do not damage, break, or modify the power cord.

Do not place heavy objects on, tug or bend it unnecessarily.

→

Doing so may result in

re or electric shock.

●

Remove the power plug itself, not the cord.

→

Tugging the cord may damage it (expose conductors, or cause disconnections,

etc.), resulting in

re or electric shock.

●

Be sure to remove dust from the power plug and/or the outlet.

Using these without removing dust may have minute electric current

ow to the

surface due to the humidity and cause a

re due to the heat.

→

It may cause a

re or electric shock.

WARNING

Содержание DC-6 Mini





































































































Результаты поиска

Содержание DC-6 Mini

Отзывы:

Похожие инструкции для DC-6 Mini

Бренды по названию

Популярные бренды

Duplo DC-6 Mini, Инструкция по эксплуатации

Результаты поиска

Содержание DC-6 Mini

Отзывы:

Похожие инструкции для DC-6 Mini

Бренды по названию

Популярные бренды