Duncan MK4 Renovator, Инструкция к добавке

Страница: 45 / 98

10
The 2
nd
line is the product name. This can be changed using the keypad, pressing
ENTER to confirm the name entered. This new name then applies to any of the
other bins that have the same product.
The 3
rd
line is the target rate for the product. This value can be changed here or
on the MAIN screen. The last entered value here or on the MAIN screen is the one
saved.
The 4
th
line is the step size. The step size is the percentage change of the target
sowing rate. This can be programmed here or on the screen INFO SETUP screen.
The 5
th
line of the display is the bin low level alarm weight. This can be
programmed here or on the INFO SETUP screen or on the ALARM SETUP screen.
The 6
th
line is the calibration factor for the product. This can be manually entered
here or on the INFO SETUP screen. Doing a product calibration of this product on
any bin overwrites this value irrespective of bin.
Pressing the ESC key returns to the BIN SETUP screen.
Pressing the ENTER key while showing the BIN SETUP screen accesses the RESET
TOTALS screen. See Figure 4. If Key I is pressed the instrument goes directly to
the MAIN operating screen. If Key E is then pressed a secondary screen is
displayed which enables the operator to reset either the ‘PART’ or ‘TOT’ area’s.
Select ‘PART’ or ‘TOT’ to highlight whish is to be reset and press the RESET button
(Key E). Press the ESC button (Key G) to return to the previous screen or the
ENTER button to confirm the reset. Press the MAIN button (Key A) when
complete.
Figure 4.
RESET TOTALS screen