SE
CTION 4
| C
ONTR
OLS
AND
I
NDICA
TORS
Infinity™
Series Servo Ultrasonic Press Systems QUICK START GUIDE
21
11.
The handles must be oriented approximately as shown in Fig. 4-10. Once tightened, the handle orientations can be
changed as follows:
a. Pull the handle straight out.
b.
Turn the handle in either direction as needed.
c. Release the handle to let it spring back into place.
12.
Take the transducer door removed earlier, align the pins on the door with the bottom of the slots on the press as
shown in Fig. 4-11, and push the door against the press.
13.
Slide the door up as shown in Fig. 4-12 until a click is heard, which indicates it is latched.
Figure 4-10
Handle Orientation
Figure 4-11
Transducer Door Pins
Figure 4-12
Latching the Door
Содержание Infinity 43NSLA
Страница 5: ...S ection 1 I ntroduction SECTION 1 Introduction ...
Страница 42: ...Infinity Series Servo Ultrasonic Press Systems QUICK START GUIDE 38 S ection 6 Operation SECTION 6 Operation ...
Страница 65: ...Please refer to our website at www dukane com contact us to locate your local representative ...
