Dukane Infinity 43NSLA, Быстрый старт

Страница: 24 / 65

Infinity™ Series Servo Ultrasonic Press Systems QUICK START GUIDE
20
SE
CTION 4
| C
ONTR
OLS
AND
I
NDICA
TORS
Figure 4-8 Closing the Clamp Figure 4-9 Latching the Clamp
5. Unlock the handle shown in Fig. 4-4 by rotating it until it stops.
6. Pull the handle shown in Fig. 4-5 to rotate the transducer clamp open until it stops.
7. Place the ultrasonic stack module into the press by sliding it in as shown in Fig. 4-6. Push it all the way in so
that the booster mounting block is inserted onto the pins in the press.
8. rotate the two handles to secure the stack in place, one at a time, as shown in Fig. 4-7 until the handles are tight
(approximately 7 turns).
9. Close the transducer clamp as shown in Fig. 4-8.
10. Latch the clamp as shown in Fig. 4-9.
Figure 4-4 Unlocking Clamp Figure 4-5 Opening Clamp Figure 4-6 Inserting Stack Module
Figure 4-7 Securing the Module