Dukane 4A3610B, Руководство по эксплуатации

Страница: 64 / 148

Assigning Primary Staff to Stations (MENU, 3, 2, 1)
This menu selection allows you to assign a primary staff member to a station. The station
MUST be covered by your base master, either by capturing, by swinging, or by coverage
assignment.
Notes:
•
If your system has version 4.XX video displays, use the video display to perform
this function instead of the base master.
•
If your system has version 5.XX video displays, no assignment functions can be
performed using the base master or the video display software. ProCare 6000
Systems with 5.XX video displays use MatchMaker
ip software to assign staff.
See the MatchMaker ip User Guide.
1. Press MENU .
2. Press 3 to select Assignments = 3.
3. Press 2 to select Assign Staff = 2.
4. Press 1 to select BedToPrimStaff = 1. Figure 3-13 appears:
5. Enter the station number. If the number is shorter than the number of spaces in the
display, press *ANS .
a. The old primary staff number appears briefly (oPsID#), then the prompt for the
new number (nPsID# _ _ _ _ _ _). See Figure 3-14 .
b. You can press VOL up to review the station number and old primary staff ID.
Then press VOL down to return to Figure 3-14 before proceeding.
3-10 ProCare 6000 Operation Manual
Assigning Base Masters, Staff, and Stations (MENU, 3)
P<-Bed#>_ _ _ _ _ _
Figure 3-13: Assigning Primary Staff to a Station
nPsID#> _ _ _ _
Figure 3-14: New Primary Staff Display