Dukane 4A3610B, Руководство по эксплуатации

Страница: 47 / 148

Canceling a Reminder
If there are reminders in the system, the idle display flashes “RR,” “RG,” or “RA” (default
settings) to indicate the levels of reminders set. See
Figure 2-17 on page 2-16. After a pre-
programmed interval, the reminder calls reappear at the base master. See Figure 2-18 .
A call placed on reminder can only be canceled at the station that originally placed the
call. (See
Canceling a Reminder on pages 4-7 and A-6.) Until the call is canceled, it will
continue to appear as a recall.
Reminder Recalls
A call that was placed on reminder reappears as a recall after a preprogrammed interval.
Reminder recalls are identified by the station number and priority, followed by “R”
(reminder) and the reminder level R = red, A = amber, G = green). The number of pend-
ing calls and/or additional reminders (1 of 3) flashes after the reminder designation (RR).
See
Figure 2-18 .
Note:
If a station calls the base master and is placed on reminder, then places a higher
priority call to the base master before the base master receives a reminder recall for
the first call, the reminder recall will upgrade to the priority of the second call.
Automatically Answering a Reminder Recall
A reminder recall is answered like a pending call. (See Automatically Answering a Pend-
ing Call on page 2-2 or Selectively Answering a Pending Call on page 2-3.)
The base master queues reminder recalls by priority and call placement order. If there is
more than one reminder recall, the highest priority recall appears first. If the recalls are
the same priority, the recall that occurred first appears first. Reminder recalls appear be-
fore new calls.
ProCare 6000 Operation Manual 2-17
Using the REMIND Button
1012 PPRI: RR of 3
1
Figure 2-18: Reminder Recall Display