Dukane 4A3610B, Руководство по эксплуатации

Страница: 36 / 148

Assigning Staff to a Station While Connected to a Call
Assigning Primary Staff (MENU, 3, 1)
Follow these steps to assign a primary staff member to a station while connected to the
station. Your base master must “possess” the station by covering it, swinging it, or cap-
turing it before you can change the assignments.
Notes:
•
If your system has version 4.XX video displays, use the video display to perform
this function instead of the base master.
•
If your system has version 5.XX video displays, no assignment functions can be
performed using the base master or the video display software. ProCare 6000
Systems with 5.XX video displays use MatchMaker
ip ™ software to assign staff.
See the MatchMaker ip User Guide.
1. Connect to the station either by answering their call or by calling them. (See pages
2-2 and 2-3, and pages 2-4 and 2-5.)
2. Press MENU .
3. Press 3 to select Staff Assign = 3.
4. Press 1 to select BedToPrimStaff = 1.
The current staff ID number appears ( Figure 2-7 ), followed by a prompt for the new
staff ID number ( Figure 2-8 ).
Note:
To review the old staff assignment, press VOL up. Then press VOL down to return to
Figure 2-8 before proceeding to step 5 on the next page.
continued
2-6 ProCare 6000 Operation Manual
Assigning Staff to a Station While Connected to a Call
oPsID#> 1111
Figure 2-7: Old Primary Staff Assignment
nPsID#> _ _ _ _
Figure 2-8: New Primary Staff Assignment