Dukane 4A3610B, Руководство по эксплуатации

Страница: 41 / 148

Paging Staff by Staff ID Number (MENU, 5, 3)
Follow these instructions to page staff members by their staff ID numbers.
Notes:
•
If your system has version 4.XX video displays, use the video display to perform
this function instead of the base master.
•
If your system has version 5.XX video displays, no pocket paging functions can be
performed using the base master or the video display software. ProCare 6000
Systems with 5.XX video displays use MessageMaker
ip software to page staff.
See the MessageMaker ip User Guide.
1. Connect to the station either by answering their call or by calling them. (See pages
2-2 and 2-3, and pages 2-4 and 2-5.)
2. Press MENU .
3. Press 5 to select Pocket Page = 5.
4. Press 3 to select Page Staff ID# = 3. Figure 2-12 appears.
5. Enter the ID number of the staff member to be paged. If the ID number is shorter
than the number of digits shown in the display, press *ANS . Figure 2-13 appears,
showing the station you are connected to:
6. Enter the two-digit number of the desired pager message. (See Pocket Pager
Messages on page 2-13.) To page the staff to that station without sending a message,
press *ANS .
a. “Waiting for Resp” (response) appears briefly.
b. The page (station number and optional message) is sent to the staff.
c. The call reappears in the display followed by “TALK.”
7. Press #CNCL or replace the handset to end the call.
ProCare 6000 Operation Manual 2-11
Sending a Pocket Page While Connected to a Call
Staff # > _ _ _ _
Figure 2-12: Paging Staff by ID Number
Msg - > 1022 _ _
Figure 2-13: Message Display Prompt