Dudek Run&Fly 2, Руководство пользователя

Страница: 43 / 48

The rigging scheme itself is published on
the next page, while tables of line lengths
you will find in attachments to this manual.
Lengths are measured with a specialised,
computer-operated device. All the lines
before measurement are stretched with a
steady 5 kg load. Thanks to
abovementioned device and proper
procedures, final tolerance of line lengths
does not /- 10mm.
Note: Distances given below are to be
understood as distances between
connection points. When cutting a line for
repair, 20 cm extra must be added, as at
each end a 10 cm stitch is required to fix
the loop. The only exception is the main
steering line (BRP), which is looped only at
the upper end, with at least 150 mm margin
for fastening brake handle (this means for
this line extra 25 cm than in the table is
needed).
Lining scheme
581 )/<