Dudek Run&Fly 2, Руководство пользователя

Страница: 11 / 48

In the new version of Run&Fly 2 it is
possible to install an optional trimmer. A
lightweight trimmer, which we have
designed especially for Run&Fly 2, extends
its speed range by +/- 2 km/h, which,
depending on the wind conditions, may be
beneficial.
Note: Trimmers can be purchased
separately. The serial wing has no
trimmers applied due to the fact that:
• customers for whom Run&Fly is
intended may not have su
ffi cient
experience of using trimmers in the
past,
• in some extreme situations (if they oc
cur), such as a side collapse or a front
collapse, in the configuration with an
open trim, the wing may behave more
dynamically, and it may require the
pilot to react, e.g. by pulling the
brakes.
How to adjust the trimmer in Run&Fly
2?
The trimmer operation in Run&Fly 2 is
unique to the dyneema lines used. The
dyneema line has no core, therefore it is
possible to thread a cord through its center.
When the line is slack, it slides easily
through the tunnel. When under tension,
the tunnel tightens, e
ff ectively blocking the
inner cord. The trimmer is adjusted as
follows:
• To release the trimmer: pull down the
upper plastic trimmer bar to loosen the
thread on the trimmer cord. The trimmer
will release automatically.
• To close the trimmer: pull the lower plastic
bar (attached to the end of the trimmer
Trimmers (optional)
581 )/<