![background image](http://html1.mh-extra.com/html/ducati/diavel-2014/diavel-2014_owners-manual_2537646240.webp)
Master cylinder type: PR18/19.
Rear
With fixed drilled steel disc.
Disc diameter: 265 mm.
Hydraulically operated by a pedal on RH side.
Make: BREMBO
Type: PF 30/32a (floating 2-piston calliper, Ø 30 / Ø
32).
Friction material: Toshiba TT2182 FF.
Master cylinder type: PS 13.
Warning
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with abundant running water.
Transmission
Wet clutch controlled by the lever on left-hand side of
the handlebar.
Drive is transmitted from engine to gearbox primary
shaft via spur gears.
Front chain sprocket/clutch gearwheel ratio: 33/61
6-speed gearbox with constant mesh gears, gear
change pedal on left side of motorcycle.
Gearbox output sprocket/rear chain sprocket ratio:
15/43
Total gear ratios:
1
st
gear 15/37
2
nd
gear 17/30
3
rd
gear 20/27
4
th
gear 22/24
5
th
gear 24/23
6
th
gear 25/22
Drive chain from gearbox to rear wheel.
Make: DID
Type: HV2 525
Size: 5/8“x1/16“
Links: 118
Important
The above gear ratios are the homologated ones
and under no circumstances must they be modified.
However, if you wish to tune up your motorcycle for
competitions or special tracks, Ducati Motor Holding
S.p.A. will be pleased to provide information about
239
Содержание Diavel 2014
