![background image](http://html1.mh-extra.com/html/ducati/diavel-2014/diavel-2014_owners-manual_2537646050.webp)
Selecting the Riding Mode
This function allows changing vehicle riding mode.
A different traction control (DTC - Ducati Traction
Control) intervention level and a different engine
power delivery (Engine) are associated to each riding
mode.
To change motorcycle riding mode, simply press
reset button (4) once and the "RIDING MODE" menu
will be displayed.
Press the same reset button (4) several times to
select the desired riding mode. To confirm the
selected riding mode, keep the same button pressed
for 3 seconds.
If throttle twistgrip is closed (vehicle stopped) the
riding mode is immediately changed; while if throttle
twistgrip is open (vehicle moving) the "CLOSE
THROTTLE TO ACTIVATE" message will be displayed,
asking you to close the throttle. This message stays
on for 5 seconds, during which you will have to close
the throttle to enable the new riding mode.
Once the 5 seconds have elapsed, if throttle twistgrip
is not closed, the procedure will be aborted (riding
mode will not be changed).
If the "RIDING MODE" menu is enabled and the reset
button (4) is not pressed for 10 consecutive seconds,
instrument panel will automatically quit the page, and
no change will be made.
Warning
Ducati recommends changing the Riding mode
when the motorcycle is stopped. If the riding mode is
changed while riding, be very careful (it is
recommended to change the Riding mode at a low
speed).
49
Содержание Diavel 2014
