![background image](http://html1.mh-extra.com/html/ducati/diavel-2014/diavel-2014_owners-manual_2537646109.webp)
Clock setting
This function allows adjusting clock. To gain access to
this function display the "setting" menu page 80, use
buttons (1) or (2) to select the "CLOCK" function and
press the reset button (4) to confirm.
In the following screen "SETTING" will be highlighted
in green (A); now, to edit the time displayed on
handlebar instrument panel, keep the reset button (4)
pressed for 3 seconds and "SETTING" will turn grey
(B).
Clock Setting
On entering this mode, the message "AM" will flash;
press button (2) to make "PM" flash; press button (2)
to go back to previous step (if time is 00:00 when
shifting from AM to PM, 12:00 will be displayed);
press button (1) to shift to hour setting, hours will start
flashing; each time button (2) is pressed, counter will
increase in steps of 1 hour; keep button (2) pressed to
make counter increase in steps of 1 hour per second
(hours will not flash while button is pressed).
Pressing button (1) gives access to the minute setting
mode; minutes start to flash. Each time you press the
button (2), the digit will increase by 1 minute. If you
hold the button (2) down , the count increases
cyclically in steps of 1 minute every second.
If button (2) is kept pressed for more than 5 seconds,
steps increase in steps of 1 every 100 m (seconds will
not flash while button (2) is pressed).
Press button (1) to complete setting, "SETTING" will
be highlighted in green (C) again on tank instrument
panel.
To quit, select "EXIT" and press the reset button (4).
Note
In case of battery off, when the Voltage is
restored and upon next Key-On, clock will have to be
set again (it will automatically start counting from
00:00).
108
Содержание Diavel 2014
