1
MAN#650508B
MVX-8X00 gauge kit
Gauge kit for 1996-2003 Models
Thank you for purchasing the Dakota Digital MVX gauge kit for your Harley Davidson Touring bike. This kit is designed to
be a direct plug in replacement for all touring models from 1996
– 2003. The kit includes the following gauges and
features:
Speed
- programmable speed calibration, performance menu, two trip meters, odometer, count down service miles, hours
running, miles to empty, security and check engine indicators
Tachometer
– programmable tach, clock, gear position, cruise control indicator, ABS indicator, and high RPM recall
Oil Pressure
– programmable warning point, uses stock sensor or Dakota Digital sensor for higher pressure
Oil Temperature
– programmable warning point, complete with new sensor
Volts
– programmable warning point
Fuel Level
– low fuel warning, uses factory sensor
Air Temperature
– uses factory sensor
INSTALLATION
Remove the outer fairing and factory gauges; this will vary by model, please follow the service manual to expose the wiring
and gauges. Don’t be alarmed by the amount of wires behind the fairing, this is a direct plug in kit and these detailed
instructions will guide you through it.
Pic of Street Glide with outer fairing removed Pic of Road Glide with outer fairing removed
REMOVAL OF FACTORY GAUGES
Now you are ready to start unplugging and removing the gauges. Start with the speedometer and tachometer gauge plugs
and speedometer cable if you are working on a cable drive bike (1996-1999).
IMPORTANT NOTE!
This gauge has an odometer preset option that is only available for the first
100 miles (160km) of operation
. See “preset odometer” for instructions. Take note of mileage if you wish to
transfer mileage over to new gauges.
