Ducati DESMOSEDICI RR, Руководство пользователя

Страница: 60 / 117

60
E
Starting the engine
Note
Follow the "High ambient temperature" procedure to
start the engine when it is warm.
Warning
Before starting the engine, become familiar with the
controls you will need to use when riding (see page 10).
Regular ambient temperature
(10 °C/50 °F to 35 °C/ 95 °F):
1) Move the ignition key to ON (fig. 49). Make sure both the
green light N and the red light on the instrument panel come
on.
Important
The oil pressure light should go out a few seconds after
the engine has started (page 11).
Warning
The side stand must be fully up (in a horizontal position)
as its safety sensor prevents engine start when down.
Note
It is possible to start the engine with side stand down
and the gearbox in neutral. When starting the bike with a
gear engaged, pull the clutch lever (in this case the side stand
must be up).
2) Move the cold start lever (1) to position (B, fig. 50).
3) Check that the stop switch (2, fig. 50) is positioned to
(RUN), then press the starter button (3, fig. 50).
This model is equipped with a servoignition system.
To achieve assisted engine starting, press the button (3) and
release it immediately.
fig. 49