Ducati DESMOSEDICI RR, Руководство пользователя

Страница: 75 / 117

75
E
Lubricating joints
Check the outer sheath of the throttle control and cold start
lever cables for damage at regular intervals. The outer plastic
cover should not be flattened or cracked. Work the controls
to make sure the cables slide smoothly inside the sheaths: if
you feel any friction or jamming, have the cable replaced by
a Dealer or Authorised Workshop.
To avoid this kind of problem with the throttle cable, unscrew
the two retaining screws (1, fig. 64) to open the case and
then grease cable ends and pulley with SHELL Advance
Grease or Retinax LX2 grease.
Warning
Close the case carefully after threading the cables onto
the pulley.
Refit the cover and tighten the screws (1) to 10 Nm.
To ensure smooth operation of side stand joint, clean off any
dirt and apply SHELL Alvania R3 at all points exposed to
friction.
1
fig. 64