2 Video matrices
Issue 4
Page 2.2 - 3
control should be connected to the video unit. If being married to other
component levels ensure the unit designated Y/G is connected appropriately so
that sync is derived from the correct level.
Connection for remote control:
16x4 video Routemasters can be controlled by a 5S2935 button-per-crosspoint
control panel for each output, by the 5SX4100 XY panel or by a mixture of both.
When using only the 5S2935 16 button-per-crosspoint control panels
Control panels are connected to 16x4 Routemasters using the female 9 way ‘ D’
type connector on the rear of the unit. Use control cable 4C009, which is available
in a variety of lengths from 10 to 50 metres. (Alternatively a control cable can be
made from a 9 way ‘ D’ type male and 15 way ‘ D’ type female using the
connections given below. Note that screened cable must be used, with the screen
connected to the shell of the ‘ D’ type connectors at both ends to meet EMC
requirements.)
For more complex married systems with multiple levels of video and/or audio, the
remote control panels should be connected to the composite video matrix (or the
Y/G matrix for component video).
Altogether 4 button-per-crosspoint panels can be used to control any one output,
each panel with a unique priority level (see 5S2935
Control Panel section 4.2).