DTK PAM-0067V, Руководство пользователя

Страница: 43 / 81

Award BIOS Setup Guide
37
A short description of the screen items follows:
Bank 0/1 DRAM Timing, Bank 2/3 DRAM Timing, Bank 4/5 DRAM Timing: Available
options are Normal, Medium, Fast, Turbo, FP/EDO 70ns, FP/EDO 60ns. It is set the DRAM
Timing of the corresponding Memory Bank.
SDRAM Cycle Length: It is used to set the SDRAM timing. The default setting is 2 and it may
be set to 3 for slower SDRAM.
DRAM Read Pipeline: You may select Enabled for this field when PBSRAMS are installed.
Pipeling improves system performance.
Cache Timing: This option is used to control the cache timing. The available options are Fast
and Fastest.
Video BIOS Cacheable: When enabled, the Video BIOS cache will cause access to video BIOS
addressed at C0000H to C7FFFH to be cached, if the cache controller is also enabled.
System BIOS Cacheable: As with caching the video BIOS above, enabling this selection allows
accesses to the system BIOS ROM addressed at F0000H – FFFFFH to be cached, provided that
the cache controller is enabled.
Memory Hole At 15MB Addr.: Choose Enabled or Disabled. Enabled allows some linear VGA
Cards to run larger frame port, or it can be reserved or some operating system.
Aperture Size: It is used to setup the maximum aperture size used by the AGP Graphic Card.
The available options are 4M, 8M, 16M, 32M, 64M, 128M, 256M.
CPU Core Voltage: This feature is implemented to simplify the jumper setting for end user. Set
it at Auto, the motherboard can auto detect the core voltage of any CPU and switching power will
generate the correct voltage to support the CPU. User also can select the CPU core voltage
through the BIOS. The option is 2.1, 2.2, 2.8, 2.9, 3.2, 3.3, 3.52. If this option is set at Disabled,
user should select the CPU core voltage by JP1, SW1-1 and SW1-2 (Refer to Section 2.4)
OnChip USB: Choose Enabled or Disabled. Enabled allows the on board Universal Serial Bus
(USB) Controller to be functioned.
USB Keyboard Support: This option only shown when OnChip USB Controller is enabled.
Choose Enabled or Disabled to support the USB keyboard.
TV OUT Mode: Available choice is “NTSC” and “PAL”. It is used to select the TV-Out
System. Please choose the option according to the TV system connected to the TV-Out.