manualshive.com logo in svg

DTK PAM-0067V, Руководство пользователя, Страница: 25 / 81

Поделиться
Скачать
DTK PAM-0067V Скачать руководство пользователя страница 25

Jumper Settings

19

2.16

MEMORY CONFIGURATION

The mainboard lets user upgrade system memory via SIMM or DIMM sockets on the
mainboard.  On board memory is located in six banks: Bank 0 - Bank 5.  Two SIMM
sockets (SIMM1, SIMM2) are provided for SPM, FPM and EDO RAM SIMM and
two DIMM sockets (DIMM1, DIMM2) are available for the 3.3V unbuffered
SDRAM and EDO DIMM.

Note:

The type of SIMM1/SIMM2 must be same.
Only 3.3V unbuffered DIMM can be used.
Both single sided and double sided SIMM or DIMM can be supported.

Table 8 provides the typical memory configurations supported by the mainboard.

Bank 0/1

(SIMM1/2)

Bank 2/3

(DIMM1)

Bank 4/5

(DIMM2)

Installed

None

None

Installed

Installed

None

None

Installed

None

Installed

None

Installed

None

None

Installed

Installed

Installed

Installed

None

Installed

Installed

Table 8

The memory size of SIMM can be 8MB, 16MB, 32MB or 64MB.  The memory of
DIMM can be 8MB, 16MB, 32MB, 64MB or 128MB.

Содержание PAM-0067V


















































































Отзывы:

Нет отзывов