36 of 3
(1) Item “ID” lists the quantity of microphones that are currently connected to the host – please
make the configuration according to the actual equipment;
(2) Item “Name” is the virtual name of the corresponding microphones, without any actual
meaning, which is automatically allocated by the system;
(3) Item “TYPE” is the type of corresponding microphones, and the user can make a choice for
“Fire paging” or “Business paging” by clicking this item;
(4) Item “ADDRESS” is the address of corresponding microphones. The user shall guarantee
that the first 1-5 microphones currently connected to the system in the “Link ID” are subject to
the one-to-one correspondence, and otherwise, it may lead to the operation failure of the
microphones.
Note: after completing the modification, please double-click the blank space to determine that there is no
drop-down box in the chart
in the listbox, and then click “OK”. Otherwise, the
modification made just now shall be invalid.
⑤
Similarly, the user can set up the switch of each microphone and specify different prompt tone
(bell voice) through the “Paging Prompt Tone Switch”, and the method is identical to that of the
previous microphone of host panel, which will not be described here (the setting of many
microphones can be switched by clicking the
).
⑥
The user can also set different control partitions for 12 groups of the first microphone
according to the actual needs, and meanwhile, add and delete them by clicking the
, and
switch different groups via the
. The display of list box of the groups is described as follows:
（
1
）
“Paging -01 group -01
：
”
：
1) “Paging-01” indicates that the group message currently listed is the microphone whose
address is 01;
2) “group-01” refers to group 01, of course, it may be group 02 or group 03, with a range of
01-12;
（
2
）
“host 01: 01, 02, 04, 05, 06; host 02: 01, 02, 03, 05 and 06”: it indicates that this partition contains
