24 of 3
4.5. Paging Operation Using Emergency Microphone
At any time, press the handheld microphone switch for the paging operation (if the user starts up the
Prompt (bell voice), the host will automatically play and the paging operation cannot be carried out until
the playing is over) —> “EMG MICROPHONE” turns ON —> begin the paging.
Note: during the paging process, the user can manually close or open the partition/zone. For a default mode, all
zones will be opened.
4.6. Operations in PAVA6006 are as follows
Select the partition/zone needing currently for paging (the LED light of corresponding selected zone
flashes green ) – single selection or all selection can be available;
Press the Green “CALL” key and wait the lighting of LED light, then the paging is available (if it is operated
in the PTT mode, please do not release the button “CALL”);
Press again the button “CALL” to end the paging operation (it is only required to release the button for the
PTT mode).
Note: the selections on the panel for the grouping and zoning operations are the same, and only the final execution
outcomes are different.
Software Introduction (PAVA6000)
Description of Icons in the Software
Save and meanwhile synchronize the user’s currently modified result to
PAVA6500 host (it is required to click this button for each modification by the
user). In the subsequent descriptions, to click “Application” indicates a clicking of
this button.
Save but not synchronize the result to the PAVA6500 host. In the subsequent
description, to click “OK” indicates the clicking of this button;
Cancel the reference result currently modified by the user. In the subsequent
description, to click “Cancel” indicates the clicking of this button
