background image

 

  22 of 3   

4.1.  Host Lines 01-06 for Manual Playing   

   The corresponding partitions can be opened or closed by selecting the corresponding keys on the 

control panel of PAVA6500 or PAVA6500E: 

The lighting (ON) of “BGM”  LED of corresponding partitions of 

PAVA6500 or PAVA6500E

  indicates that 

this partition is outputting the audio of the line selected currently by the user.     

Notes:   

1.    The input audio of host line cannot be outputted by transmitting it to the partition of extended host, but 

the EVAC voice of the host and the audio of handheld microphone and PAVA6006 can be outputted  by 

transmitting it to the extended host;     

2. The audio of the extended host cannot be outputted by transmitting it to the partition of the host;   

3. When it  is necessary to output the audio of different lines, the user can only need to make “LINE OF 

CONTROL (LINE CONTROL)” to point to corresponding index numbers of the lines.       

4.2.  Manual Playing of EVAC Voice 

   Enter the “EMERGENCY” Mode – in the OFF state of Emergency LED, press it to make the LED to flash 

in a rhythm;     

   Select the output partitions (the method is identical to the above “Host Line 01-06 for Manual Playing”. In 

the manual mode, it is impossible to select the partitions of extended host on the host panel. The automatic 

mode or PAVA6006 or PAVA6500FM is available);   

   Select the outputted EVAC Voice –  it will be OK when the corresponding LED lights of “EVAC MSG” or 

“ALERT MSG” are ON.   

Description:   

There are tow ways (execute the same functions) to exit from the EMERGENCY Mode (i.e. Reset)   

Way 1: Press again the Key “EMERGENCY” to die out the corresponding LED lights;   

Way 2: Enter the relay short-circuit signals (without voltage) with a value 

  0.5S through the CIE reset input contact at 

rear row of the host.   

   

4.3.  Automatic Triggering of EVAC Voice   

   The user has effectively configured the contacts of the host or extended host via PAVA6000.   

   If it is not configured, it is subject to a output of whole partition in system default;   

 As to the Contact Mode and Level Mode, the EVAC voice can be triggered through the closing in the 

following figures of the host or extended host (the exit can be realized by the same reset mode of manual 

playing)   

Содержание PAVA6000













































Отзывы: