37
GB
NFC (Near Field Communication) Operation
Pair your NFC-enabled mobile device directly with this unit by just a single tap.
1. Switch the unit to Bluetooth® mode.
2. Activate NFC on your mobile device.
3. Tap the mobile device on the icon of the unit.
4. Operate your mobile device for playback features.
5. To disconnect, tap the mobile device on the icon of the unit to disconnect or disable
NFC from your mobile device.
The NFC function only works with mobile devices that support NFC technology.
Optical In Operation
This feature enables you connect the audio sound signals from other sources to the unit.
1. Before connecting to the mains socket, use an optical cable (not included) to connect
to your external audio device through the Optical IN socket at the rear of the unit.
2. Connect the mains plug to the mains socket. Press on the unit or on the remote
control to switch the unit on.
3. Press MODE on the unit or on the remote control repeatedly to select Optical in mode.
4. Operate your audio device directly for playback features.
• Make sure the audio output setting of your source device is set to PCM mode.
• The unit will automatically switch to standby mode after 10 minutes if the source device is
disconnected, switched off or the volume is too close to mute.
RNDUDIB_W15E_IB_5L_Final190814V4.indb 37
22/08/2019 15:58