31
GB
DAB Operation
1. Press MODE on the unit or on the remote control repeatedly to select DAB radio.
2. The unit will automatically perform auto scan function. During the scan, the display will
show “Scanning…” that indicates the progress of the scan and the amount of stations
that have been found so far.
3. Once the scan has finished, the unit will display a list of the found stations. Explore
the found stations by turning SCROLL & SELECT Dial on the unit or press
on the
remote control then press SCROLL & SELECT Dial on the unit or press OK on the
remote control to confirm the selected station. All stations that have been found will be
automatically stored.
In DAB mode, press MENU on the unit or the remote control to display the DAB menu. Turn
SCROLL & SELECT Dial on the unit or press
on the remote control to scroll through the
options then press SCROLL & SELECT Dial on the unit or press OK on the remote control to
confirm.
Station list
Select from a list of DAB stations.
Scan
Perform auto scan.
Manual tune
This can help you when aligning your aerial or when adding
stations that were missed while auto tuning.
Prune invalid
Select YES or NO to remove all invalid stations.
DRC (Dynamic
Range
Compression)
If you are listening to music with high dynamic range in a
noisy environment, you may wish to compress the audio
dynamic range.
Select DRC high, low or off.
Station order
Select to arrange the station listing in Alphanumeric,
Ensemble or Valid order.
Secondary Services
You may see a “>>” symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra
services that are related to the primary station. e.g. a sports station may want to add extra
commentaries. The secondary services are inserted directly after the primary station in the
station list.
To select the secondary station, turn SCROLL & SELECT Dial on the unit or press
on
the remote control until you find the secondary service you want, then press SCROLL &
SELECT Dial on the unit or press OK on the remote control to select it.
When the secondary service ends, the unit will automatically switch back to the primary
station.
RNDUDIB_W15E_IB_5L_Final190814V4.indb 31
22/08/2019 15:58
